News - Best Settings Warzone 2. 0 & Dmz Best Controller Settings
Intro
Warzone 2, and DMZ have just dropped, and in this article, we're going to go over the best settings to make sure you get the most out of these games.
Controller settings
Getting straight into it. I'm a controller player, and we're going to fly through this as quickly as possible, so we are playing on a controller, and you will have controller settings in this article as well, so button layout is set to default.
To be perfectly honest, default or tactical are the two best options. You don't really need to use anything else now. You can flip the trackers if you want to; it will give you a bit less of a delay when you're fighting with your weapon. The default controller vibration is off the wall when it comes to horizontal and vertical stick sensitivity.
Five, six, seven, and eight are where you need to be. I make sure they're both matching. That is all you need to know there. Some people do like playing on higher sensitivity settings, like 20, but to be honest, the majority of people won't be able to play on those kinds of settings. When it comes to sensitivity multipliers, I have them set to the standard at the moment.
Vero. Aim axes you just want to leave as standard; you don't really want to change that in those light behaviors. Hold change Zoom Shared input is the default when it says Sprint tactful or Sprint automatic. Sprint: I prefer automatic tax printing, but if you don't want to have a slow Sprint to fire, then choose automatic Sprint or off.
Personally, if I were going to choose one of the other options, automatic sprint would be the option there when it comes to equipment and the behavior you want to hold. This is the default for previous chord games' weapons: activation is "ads," and melee interact reload behavior is "tap to reload." You want to reload quicker than you pack up a weapon.
Um, but it depends on the situation sometimes, but personally, I would rather prioritize my reload, so that is why tapping to reload is the main option. Armor and plate behavior is plyo, and this is across all game modes.
Advanced settings
Next up, we're moving into the advanced tab. This is very important stuff. So Target MSS is set to MSS, type Black Ops, or default. We've actually made a whole article doing in-depth testing on which of these options is the best, and the two best options are default or Black Ops.
So make sure you check out that article, and I'll leave it linked at the end of this one. Gyro Behavior: You want to have this set if you have a gyroscope in your controller's response curve. I like the dynamic standard; the other good option is here as well, but my personal preference is for that one; multiplier focus is on EDSA; and instantivity transitioning time is instant.
You want to make sure you can aim as quickly as possible. A custom sensitivity pair for Zoom is very important. But the lore zoom, so anything between a four- to five-times optic, which is basically that vlk optic, you want to make sure you put that at the same level, but between 0.7 and 0.8, 0.9 around about that range is really good, and then after that you want to set it to like a 1.1 or 1.2, then we'll be using inputs in the dead zone.
You want to make sure you set This is very important, and you want to make sure 0.5 Leave the Mac on stick and then the triggers at 0.5 and 0.5 as well, and if you do have stick draft, you will need to account for that as well. Auto-move forward is set to single tap because you don't want to double tap all the time on your analog stick.
Ground Mantle Automatic Airborne Rental Ground Mantle Automatic is all off and then invert slide and dive. behavior that's personal preference but essentially uses tap to slide, or you can swap it so you tap to a dolphin dive instead. Now, I personally still prefer sliding in this game. Plunging underwater is very important for Warzone Plunge, and freely is a setting you need when it comes to actually swimming in this game.
It makes it easier to go up and down and left and right when you are in the water, and then to resurface as well. Automatic parachute deployment is something you do not want; you want that set off because once you get closer to the ground, you can hit your parachute. and land quicker than other opponents, very similar to the previous warzone of sprinting doors.
Dash I have on a ledgehang. Mantle behavior is mantle-only, and you don't want to have it set to movement-based because it would depend on the movement. If it does that, it might throw you over the ledge, and sometimes you just want it to be consistent, so I would rather have mantle-only ads. Deck swap is off the backpack, alternate control is off, and you want to use a d-pad to get through the backpack.
In my opinion, weapons' mount movement exit is on, so if you've mounted and you move, it will take you off that, of course, and the weapon will exit delay. You don't want any delays with a depleted ammunition weapon, so it's just off. You want to be able to move as quickly as possible in this game, especially from point A to point B, so even if your SMG or mortar has no ammo, you might still want it in your hands for automatic C4 detonation or quick detonation.
Again, you want this on your vehicle.
Display settings
Up we've got display settings, and while this is mainly for PC players, there'll be a couple of settings in here that will apply to consoles as well. Full-screen borderless or full-screen exclusive are both really solid options, so just make sure your monitor and your graphics card are selected, dynamic resolution is off, aspect.
Ratio Just make sure that it's set to what your monitor is vsync. Off-vsync menus of a custom frame rate limit again, you can set that to just a little bit above what your monitor's maximum frames are. For your monitor, make sure your shaders are up to date and optimized; this is very important, otherwise your game will feel like it plays like crap gamma.
I have it set to default; for brightness. I've set it to 65; 60 is also really good; constrained mouse to game window is again off, but that is mainly if you are playing on PC and tabbing out of games; and in Focus mode again. I have set it to off. Now when it comes to the quality settings, again I have them set to a custom render resolution of 1440p, but if you play 1080, you can still apply these settings upscaling, and again you want to have this turned off.
And some people are basically seeing the Fidelity Cast as a good option, but honestly, none of these settings are good: anti-aliasing, filmic SMA, two times the best anti-aliasing. Quality apps set to Ultra are good, but normal and high are also good, as is a article memory skill set to 80 texture. The resolution is normal and achromatic, and the nearby level of detail is high.
